Tuesday, 9 July 2013

TIPS: Install Official JB 4.2.2 XXUAMFA Firmware on Galaxy Tab 3 P5210 (WiFi version)

Samsung just issued the official Android 4.2.2 Jelly Bean XXUAMFA revise for the Samsung Galaxy Tab 3 WiFi type model number p5210. throughout this article, we will educate you how manually establish formally Android 4.2.2 JB XXUAMFA OS on Tab 3 apparatus. This newest update is also accessible by OTA but not for all Tab 3 WiFi type proprietors and it is issued by phases. So following this step by step direct you’ll be able to install on Galaxy Tab 3 the newest authorized Android 4.2.2 Jelly Bean type named XXUAMFA programs.

This new revise comes with new submissions, possibility to customize your OS, some bug repaired, but also it comes to advancing your Android experience with the newest new features capability. In case you desire to understand how to update the Samsung Galaxy Tab 3 apparatus WiFi type with the newest XXUAMFA firmware, you have need to follow all the next steps listed below.

If you have a Galaxy Tab 3 fixed apparatus or it is running a custom ROM OS, then you cannot obtain and establish mechanically the new official revisions.

In case you apply a stock ROM firmware the root aces will be revoked, and your apparatus will be restored to manufacturer limits and then it can obtain and apply the further officially updates by OTA.

Another advantage when you’ll install an official ROM is that the warranty of your Tab 3 device will be restored in case the same was void with a custom ROM or root access, and in case you’ll install this latest update it won’t void the Tab 3 warranty.
This update presented here works for both rooted and un-rooted devices, for installing the update file we will use Odin app which is a flash tool developed and offered by Samsung.
This manually update isn’t an official procedure, and that’s why you need to be careful, and to know exactly what you have to do.
To apply this step by step guide isn’t required to have the Tab 3 rooted.  In order successfully complete the flashing guide, you have to prepare some things before move to the installation process.
  • Backup the Samsung Galaxy Tab 3 stored data on the internal device’s memory, this is a manually method and you never know what can happen, and a wipe data will be required, so save all your important data like a precaution before to move forward.
  • Save your SMS, call logs history, EFS folder, internet settings, all applications, images, videos and so on.
  •  In case you have installed a custom recovery image like CWM or TWRP recovery then you can get a full backup of your current ROM using the Nandroid backup.
  • During the step by step guide,  a Windows PC and the device’s USB cord will be necessary to have near of you.
  • Uninstall or deactivate the security protection tools form both PC and Tab 3 tablet, applications such as antivirus or firewall.
  • Enable the USB debugging option from the next path: “Settings -> Applications -> Development -> USB debugging”.
  • This guide works only with Samsung Galaxy Tab 3 model number P5210 WiFi version.
  • All the information and instructions listed here are provided only for educational and instructional purposing, so Android.sc team is not responsible or held liable in case you’ll lose any data or your device will be bricked or damage during or after installation of this new firmware. So, perform this guide only on your own risk.
  • Download and install the Samsung Kies on your PC to install the suitable drivers for the Samsung Galaxy S3 device.
I think these are all prerequisites and instructions that you need to follow before to move to the next section where we will teach you how to update official Android 4.2.2 Jelly Bean XXUAMFA firmware on Galaxy Tab 3 P5210 WiFi version.

 How to Update Galaxy Tab 3 P5210 (WiFi version) to Official JB 4.2.2 XXUAMFA Firmware

  1. Download the firmware file from here and save the same on your PC.
  2. Extract the downloaded content on desktop folder of your
  3. Download Odin, extract the same and install Odin application.
  4. Now, run Odin app on your computer.
  5. Verify if the drivers for your Tab 3 device are installed on your PC.
  6. Turn off your Galaxy Tab 3 device.
  7. Next, boot the Galaxy Tab 3 P5210 tablet into download mode. For doing that you need to press and keep holding the Volume Down, Power and Menu buttons simultaneous.
  8. While the tablet is on the download mode menu, connect the tablet to PC using its USB cable. As I said previously, the ODIN app must be running on your computer.
  9. Now, look the ODIN interface and a “added” message need to be displayed and the ID:COM section will be collared on yellow or blue.
  10. In case,  ODIN doesn’t say “added” message and collared the ID:COM section then you need to reinstall the drivers again and repeat all the steps from beginning.
  11. Now select the “PDA” option from ODIN.
  12. Next, pick the firmware file from the extracted desktop folder.
  13. Then, when you are ready to begin click on “start”.
  14. When the installation process is done ODIN will say “pass” message
  15.  Now, disconnect the USB cable from PC.
  16. Reboot your Tab 3 tablet.
  • In case you completed the step by step guide, when you will reboot the device, it will get stuck or entering in a boot loop, then you have to do:
  1. Firstly, reboot the device.
  2. Secondly, boot the tablet into recovery mode( press and keep holding Power, Menu and Volume Up buttons on the same time)
  3. Now, from recovery mode menu select “wipe data factory reset” and “wipe cache partition”.
  4. After you complete a wipe select “+++go back+++” for returning on the recovery main menu and from there select “reboot system now”.
  • In case ODIN is stuck during the installation procedure you’ll have to do:
  1. Disconnect the tablet from PC by removing the USB cable
  2. Force restart the Samsung Galaxy Tab 3 device
  3. Now, close Odin app
  4. Go, and reinstall the drivers once again
  5.  Repeat all the installation procedure steps for the beginning.
 Now you done on about how to update Samsung Galaxy Tab 3 with latest and official Android 4.2.2 Jelly Bean XXUAMFA firmware.



Post a Comment